The fastest light curtain under the sun.

Please take a look!

parallax-scanner-grey-mobile-900

HIGHLIGHTS

RapidoScan – a new generation of measuring light curtains

High Speed Extremely high measuring rate
Makes up to 4000 measurements/second running 50 beams
More info

Continuous measurement No processing pauses between measurement cycles
Beam cycles starting immediately after each otherl
More info

rapidoscan-messen2

Measure only where your object is Fewer beams require less measurement time
No lower limit for the measurement time

Looking at objects with precision Very high resolution of 2.5 mm
Highly optimized optical beam geometry
More info

Every beam an analogue value Output data as 8-bit value in line-scan mode
or as binary "beamstream" value
More info

Higher precision than nature Measuring of transparent objects at high speed
More info

Only micro-seconds from event to reaction Two digital outputs with extremely short response times
Switching output responds within a few microseconds
More info

EtherCAT – Nothing faster Process Data accessible via Industrial-Real-Time fieldbus interfaces
Get all data of every measurement cycle
More info

Integrated web server Easy parametrisation and visualisation
Simple but safe access to firmware updates
More info

WLAN - Access to inconvenient locations Run visualisation on every PCs, tablet and smartphone
Data visualisation accessible in all assembly situations
More info

TECHNOLOGY

The RapidoScan is available in a large number of sizes from 160 mm to 2000 mm. The flexibility of the company dEE dieEntwickler Elektronik GmbH and its employees permit individual, customer-specific solutions even for smaller quantities.

rapidoscan-image

Technical data

SPECIAL FEATURES

  • Maximum resolution
  • Virtually dot-shaped beam geometry arranged on an optical level
  • Extremely short measurement cycle
  • High-performance process data interfaces with access to all measurement data from each measurement
  • Transparent objects can be evaluated at full measurement rate
  • Connection port for rotary encoder enables direct linking of positional data w/o PLC
  • Corrosion-resistant and easy to clean plastic housing

DATA TABLE

Technical features
Technology Emitter / receiver
Measurement cycle 5µs per beam, no additional processing or pause time
Beam distance from 2,5mm (parallel mode)
Diode count 64…768
Monitoring height 160…1920 mm
Range 0…2500 mm
Protection rating IP67
Interfaces
Process data EtherCAT, Powerlink, ModbusTCP + Autosend-Port
Digital I/O 3 x Digital Output + 1 x Trigger-Input, or
1 x Digital Output + 2 x Encoder-Input + 1 x Trigger-Input

Datasheets

EtherCAT

  • EtherCAT slave interface according to CoE (CiA DS-301), FoE
  • Integrated dual port EtherCAT switch (In Port / Out Port)

POWERLINK

  • POWERLINK V2 interface according to EPSG DS 301
  • Integrated dual port hub for efficient cabling

ModbusTCP + autosend

  • Modbus TCP interface for parametrization and diagnosis, additional autosend port for realtime process data transferring
  • Open system interface to connect with Ethernet-based PLCs and PCs over UDP/TCP (VIPA, S7-1200, S7-1500, …)

SERVICE & SUPPORT

With dEE, customer support goes far beyond the delivery and installation of the product. Here you will find knowledgeable and answers to open questions.
 
DOWNLOADS
SUPPORT-ENQUIRY
 

Newsletter

Receive the latest information on our measuring light curtains quarterly with your subscription to the RapidoScan Newsletter. Your data will of course be treated strictly confidentially.



I accept the data privacy statement.*

CONTACT

Call us or write us! We are looking forward to quickly take care of your concern!

    Name*

    E-Mail*

    Company

    Your message*

    I accept the data privacy notice .


    Contact details

    1. dieEntwickler Elektronik GmbH
      Linzer Straße 4
      4283 Bad Zell / Austria

    2. T +43 (0)7263 20900-0
      F +43 (0)7263 20900-4

    3. office@rapidoscan.com

    ÜBER UNS

    The RapidoScan is a product from the Austrian high-tech company dEE – dieEntwickler Elektronik GmbH

    • dEE – Das Unternehmen

      dEE – dieEntwickler Elektronik GmbH ist ein auf die Planung, Programmierung und Realisierung technischer Software spezialisiertes Entwickler-Büro in Bad Zell und Purkersdorf/Wien.

      Gemeinsam mit Kunden, Mitarbeitern und Partnern erdenken wir Neues. Wir entwickeln innovative Lösungen und wertige Produkte. Mit umfangreichem Support und verlässlichem Service sichern wir alle Projekt-Phasen. Die Basis dazu ist eine hohe Flexibilität zur Teilnahme in differenten Umgebungen und eine ausgeprägte Kompetenz in der Problem-Analyse. Umfassendes Know-how bei Hard-, Software-Entwicklung und in Multiprozessor-Applikationen versetzt uns in die Lage variantenreiche Werke zu entwickeln.

    • Portfolio

      • Echtzeit-/ Industrielle Kommunikation
      • Embedded Software Automations
      • Embedded Linux Programmierung
      • Programmierung Mikrokontroller
      • Hardware und Software Optosensorik
      • Gateways und Protokoll-Converter

    • Team

      Lernen Sie unser Team kennen und besuchen Sie unsere Website:

      www.dieentwickler.at

    firma-dEE

    rapidoscan-logo-small

    A trademark of dEE – dieEntwickler Elektronik GmbH  .  Linzer Straße 4  .  4283 Bad Zell / Austria   .   LEGAL NOTICE   .   DATA PRIVACY